SD5-1 Metal Slitter Shear
The DRCO Metal Shear SD5-1 is a highly maneuverable electric shear, capable of making short turns with a smallest inner radius of 2″ (50 mm). Designed for cutting up to 20-gauge steel, 24-gauge stainless steel, and 0.060″ aluminum, it is ideal for the automotive industry and roof and wall facades. This makes the SD5-1 perfect for zinc processors, interior construction, body shops, garage companies, and damage repair.
Knives and jaws can be reground. These light, compact and robust shears are used both in assembly and in mass production by means of linear guide systems can be used.
Description
Features:
- short curves possible
- ideal for tinsmiths and body-coach workshops
- ideal for sheet metalwork
- installation of car sun roofs
- support-roller keeps the shear flat
- acoustic ceiling metal tiles, lighting fixtures
- cutting extruded and formed shapes
- U-,C- and L- profiles
- cuts without distortion or straightening of formed parts
- burr free cutting
- no finishing of the edges is required
- accurate cutting along a marked line
- single-side trimming is possible
- working speed up to 9 m/min
- cutting of U-,C- and L-profiles
- clear view to scribed line or template
- long life tool
- easy, one hand, operation
- simple and safe to use
- noise under limit regulations
- insulated and suppressed motor
Additional information
| Weight | 4.72 lbs |
|---|---|
| Dimensions | 16 × 3.5 × 8.5 in |
| Shear Dimensions | 12 1/4″ x 3 1/4″ x 2 1/4″ |
| Shear Weight | 3.5 lbs (1.6 kg) |
| Working Speed | 30 fpm (9 m/min) |
| Minimum Radius | 2″ (50 mm) |
| Max capacity Steel | 20 gauge (1 mm) |
| Max capacity Stainless | 24 gauge (0.7 mm) |
| Max capacity Aluminum | 0.060″ (1.5 mm) |
